Chicken rabbit sheep pig poultry feed milling machine

Model Number: KL200B Key Specifications/Special Features: KL200B flat die pellet Mill---7.5kw, 380V/220V, 50Hz/60hz, three phaseflat die pellet machinesOur flat die pellet machines are divided into two series, the KL series pellet mills and the MKL series pellet mills. The KL series pellet mills can both press animal feed pellets and wood sawdust pellets, but the capacity of making wood pellets is lower than that of making feed pellets. The MKL series pellet mills have the special design for making wood sawdust pellets.If this model is not suitable for you,don't worry, leave a message at the bottom, to tell me your detail requirements, such as the raw materials, your capacity demands, which animals you feed and etc. I will try best to assistant you the most suitable model for your choose.Believe me,you must could get the right one from us.Specifications1. This machine is driven by 7.5kw, 380V, 50Hz, three phase electrical motor.2. This machine can both make animal feed pellets and wood sawdust pellets3. The die hole size can be adjustable, there are 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm and 10mm for your choose.4. The length of the final pellets can be adjustable, too.
5. Feed capacity: 200-300kg/h
Sawdust capacity: 110-140kg/h

Working principle of the poultry feed making machine

a) It can process the oil cake and other mixed waste material to granule at one time. And it is columned granule feed and have slippery firm.
b) During the process of producing granule, the temperature can almost reach 70 to 80 centigrade. It can make flour into paste. The inner granule is cooked and fully penetrated, so that not easy to go moldy and degenerative. Then it can be stored for a long time and improve poultry dainty and assimilation function.

What could I do if the pellet mill can't produce pellets?

A: New flat die pellet mill in first use may not produce pellets, because of the low smoothness of mould and bad cooperation in new devices. After using oily material for a period, the pellet machine can run smoothly.
B: The clearance between rollers and dies is too large. You can tighten the screw to narrow the gap to 1.5-2.5 mm.
C: Necessary steps to update a new die or roller shell because of wear and tear caused by long-term service.
D: The material is too wet or too dry, resulting in low productivity. You’d better increase or decrease the moisture to proper rate, generally 13%-16% in raw material.

CE certification and service

Our pellet machine all have CE certification.

As 7/24 email and phone call service is available, I am ready to answer your any specific questions regarding to our machinery and pellet mill in particular.